Product reviews for Motorcycle Lift Table 1100lb - Elevator 1100

Works great!
-Steve B.
Austin, TX

I love the lift. It is perfect for working on mowers, snowblowers and motorcycles. I wish the motorcycle ramp was a little longer as pushing a 1000 lb motorcycle on the lift is challenging. I was told by a friend that I should try doing it while standing on the side and putting it in gear and assist it while it's running. I'm a little hesitant to do this though.

Other than that it works great !

The lift is working good.
Clyde, New Ipswich, New Hampshire

Excellent, I love it!
-Jim, 603 Baggers
Claremont, NH

I love it !!! The air piston design is the BEST. I lifted and lowered the lift over 10 times !!!! Setting it up, my compressor did not cycle 1 time !!!!! My other 2 lift have air behind piston which is VERY POOR and an incredible WASTE OF AIR ! SECOND SHIFT CYCLES will be REPLACING the OTHER 2 LIFTS which 1 is a HANDY LIFT and other is DIRECT LIFT . By far at this point . Time will tell. But this ELEVATOR 1100 IS A SUPERIOR LIFT . thanks again looking forward to MANY YEARS OF BUSINESS WITH YOU.
-Robert, Second Shift Cycles
Litchfield, NH

Great.... makes life alot easier.

-Summit Powersports
Jackson, Michigan

Thanks guys, this was a great buying experience for me,.....got just what I needed with quality and workmanship I haven't seen in other lifts. It works perfect and will pass my words of praise about NHPROEQUIP.COM to others.
Thanks,
Joseph
Center Conway, NH

I love my lift.
-Nicholas, Newton, NH

It's awesome!! It is a very well built and smooth fast lift and lowering! I love it!! Thanks !!

Great lift, great price and fast shipping. It's double duty of any other lift I've used or researched. Very sturdy with a heavy utv or atv on it and its the easiest to add and remove the extension width panels ! No tubing or pins to put in and take out to add the atv wide panels and the drop outs are very solid and easy to operate. I am just looking for more projects to work on on the lift!! Its so convenient and saves my back!! Thankyou NH
Lifts ! Best tool in my shop!

-Bryan H.
Greenville, SC

Great so far! Haven't had a chance to work on it as much as I would like but it is a great tool that I wish I'd had years ago!

-Jonathan, Mt. Airy, NC

Awesome - we have the Cushman Truckster on there now.

-Mark, Epping, NH

It works nice and smooth as Bob said it would. I am not a mechanic but enjoy wrenching on my own toys. I research for a while, as everyone does these days, before pulling the trigger on this purchase and am very confident I made the right choice. Lift is to quality and Bob was accommodating, great custumer service.
-Chris A., Lowell, MA

Been using the lift I got from NHPro for a few months, works awesome! 👍 very happy with it. Also referred a friend to buy one because he liked it.
-Evan, Brogue, PA

I set up the lift up first thing Tuesday morning. I used it everyday and works great. As you said it would work on my 20 gal air compressor and it does.  The straps I bought absolutely do the trick ( no more excess straps ). Thanks.
-Ron D., Marlboro, MA

It's great, thank you.
CJ, Chichester, NH

I love the lift, use it all the time and very happy with the tool boxes that I got from you too!
-Jeff B., Canterbury, NH

All good. Had the bike up on it most the winter. Happy with the electric lift. Really enjoying the lift and it’s functionality!
-Gene, Chadron, Nebraska

Great lift!
-John, Moultonborough, NH

Works great,excellent value. ATVs, UTVs, golf carts, mowers and snowmobiles have been on this lift. Should have gotten a long time ago. Thanks for the excellent customer service.
-Jim D., Northville, NY

That lift works excellent, I should have had one of those years ago.
-Andrew, Monkton Ridge, Vermont

Love it!! It’s great!!
-Burdick Street Equipment, Oxford, MI

Best thing ever, a real back saver.
-Dennis, Fort Myers, FL

Lift's great, really is, couldn't be happier with it! Thanks again.
-Paul, Rhode Island

Great - I love it.
Jon, Chester, NH

Great guys to work with.  I ordered a motorcycle table lift a year ago and since day one had a problem with the wheel chock.  I tried to fix it myself a few times but the problem kept happening. Nhpro addressed the problem and went well above what they had to do and well above what I had even asked them to do to address the issue.  Also, the original purchase was smooth and they were very helpful in helping me determine what product to choose.

It’s working out well. Probably going to get another one in the spring.
- Jeff, One Pull Lawnmower, Southbridge, MA

The lift is awesome! I use it every weekend!!
-Brian, Putnam, CT

It’s been great. It’s very sturdy for my touring bikes.
-Edmar, Prairieville, Louisiana

The lift is awesome. Thanks again.

-Boomer, Waitsfield, VT

Nice lift.

-Richard's Sport Shop
Lincoln, Maine

Love the lift! It's used every day in the shop. When I'm not using it for smaller equipment, I am using it as a teardown table!
-Vinny, Fall River, MA

Picked up the elevator 1800 this weekend, it is every bit as awesome as y'all said.
-Donald D., Massachusetts

Got the lift late yesterday.  I am not usually prone to compliments...but your prep for the shipping was great!  FedEx freight did a really good job of handling it & keeping me informed.  I got several phone calls prior to it arriving.
Might send you a photo or 2...am loading a bike on it this morning.
Thank you for very good service, that is kinda rare today.
Bob D.

I absolutely love it. It makes things so much easier.
-Kevin, Salem, NH

Works great. As soon as the new shop is ready, we'll be up after another and some other stuff as well.
-Brentwood Power Equipment Center, Brentwood, NH

Works excellent.
-Azzy Powersports, Effort, PA

Working great!
Blass Contracting, Ghent, NY

Thanks for the quick shipping. Packaged well. Works awesome !!
-Kevin,  Rochester, Minnesota

Weare Repair purchased a lift table from NHProEquip. While we did have a general idea of what we were looking for, the staff took the time to review the benefits of each model with us. This enabled us to select the best table for our space and intended use. NHProEquip’s extensive inventory enabled us to take immediate delivery. We have been using the table for a month now and are fully satisfied. When we need additional equipment, we will definitely be a repeat customer.
Janice, Weare Repair

Great, totally a good purchase.
-Mark, Charlton, MA

It’s great - love it.
Bill, Meredith, NH

The lift is awesome.
-Corey, Maple Grove, Minnesota

We have one NH[ProEquip] and Handys in our shop, soon to be just  NH[ProEquip]. These are great lifts.
-Randy J.

Excellent. Wish I had room for another.
-Roy's Power Equipment, Hanover, MA

Love it!
-Chris, Amherst, NH

Love it. Works great.
-Brian, Bandit OffRoad
Manchester, NH

It has worked out great so far.
-Glynn, Laconia, NH

It is awesome! Absolutely love it so far. I will be visiting you for other equipment needs for sure!
-Shawn, Moto Minute Clinic
Nashua, NH

Awesome- no problems with either one, the 1100 or 1800 elevators!
-John, Nashua, NH

Hey Bob! Lift table is Awesome ! Everything I wished for and more !
-Mike, Raymond, NH

Works great, I've used it several times.
-David, West Monroe, Louisiana

Very good so far.  We'll be ordering a wheel kit so that we can move it around our shop a little easier.
-John, J.M. Carr Landscaping, LLC
Loudon, NH

Hard used. Lifting Ural sidecar motorcycle, Harley bagger, lawn mower, vw trike. Used as jig and welding table. Can't  kill it, best thing in my home shop. Still works like new...the best I've ever owned. Should have ordered with wheel vice. Will be ordering one, had big chock set up but a pain to use. Vise is better.