Blog

Chris in Salisbury, MA, says, "Lift's great, really is, couldn't be happier with it! Thanks again," of his 2 post Launch Tech lift.

For limited time, get a FREE Mag Wheel Upgrade with purchase of this tool box - 55" X 25" 12 Drawer Rolling Tool Cabinet model# CRX552512RC. The Mag Wheel upgrade is valued at $349, so this is an incredible offer! Call us for more info 603-234-2612. The CRX Series tool boxes are made by Extreme Tools. The CRX Series is based on Extreme's RX Series but with upgrades added! Spend a fraction of what you might for a name brand and get the same quality! See below for some customer reviews comparing these boxes to name brands.

Part number (Extreme's "RX" Series) change to CRX to designate the following upgrades:

• All boxes with the CRX prefix are labeled RollCabs.com and follow the same warranty as Extreme Tools products.
• The CRX series (improved features) comes in 55” and 72” sizes with the Rollcabs.com label include heavy duty 150 pound ball bearing drawer glides.
• On all CRX series drawers 4” high or more, where two ball bearing glides are used, the load capacity is 300 pounds.
• CRX series use rubber drawer liners in place of foam drawer liners
• CRX series roll cabinets include new, thick protective work panel in place of foam pad.
• All CRX toolboxes are not only reduced in price but have added benefits compared to the RX Series Extreme Tools' tool boxes!

"Love it. Just bought the black triple bank top and bottom it's a ton of storage for the buck everything seems to be high quality and just as good as Snap On and MAC."
-Nicholas, Newton, NH

Just unboxed my new toolbox! Extreme Tools. Wow it is so nice I wasn’t sure what to expect since I’ve never seen anyone with this brand. But if your in the market for a new box this is 3x the box for the money compared to anything else. Very impressed. They are very close to and in some ways they are rated better than Snap On. And 1/4 the price. They have the best prices trust me I researched for about a month. And free shipping!!!
-John H., Lowell, Arkansas

New box, came packaged really well. And seems to be on par with other boxes, even impressive next to my coworkers $20000 snapon toolbox with side cabinet.
-Scott, Wiscasset, Maine

Rich shared some awesome photos and perspective that we don't receive very often! Below is a photo of the lift, packaged and secured - this is when Rich received it. He also included the photo we included in with his shipment, verifying how it left our warehouse. This way, if there are any discrepancies, any damage, denting or tampering in any way, the receiver of the shipment will be aware to not sign for it! We were appreciative of Rich acknowledging this effort - we really try to make sure we are as thorough as possible for the protection of all parties involved. It overall has made for smoother transactions with our customers. Here's the Google Review (and photos) Rich left for us!

"Got my lift today, So excited to get it set up. Packaged very well, Thanks.
I see skids all the time, and am very impressed in the care taken to package it to prevent damage during shipment.
Not to mention the photo on the skid, so you can see rather quickly if anything is missing.
I drive truck and would be very happy to see a skid like this...
most of the time they are packed sloppy with loose bands.
Speaking of the band's they even use corner protection... Awesome Job NHProEquip.com
Just shows the pride and care you take to get stuff to your customers timely and undamaged.
Excellent customer service and response time as well.
!!! HIGHLY RECOMMEND BUYING FROM THESE GUYS !!!
I'm not big on taking time to do these reviews because I'm not usually that impressed with companies, These guys however deserve it.
(((AND NO I'M NOT BEING PAID OR REWARDED FOR THIS REVIEW.)))
They earned my review"

Check out the photo below of a Phoenix Wheel Balancer, displayed at Ballistic Motorsports in Bow, NH. Thanks to Ballistic Motorsports for sharing! It can be necessary to provide tire and wheel service even though it may not be the most common service you provide. Where do you draw the line with how much money you spend on tire and wheel service equipment? As equipment providers, it is important for us to sell high-end production equipment, but in many cases it is also necessary to provide low cost quality equipment for those who do low to mid level tire and wheel service. Whether it be an F350 wheel you need to service or a medium to small vehicle, like a Honda a Civic, Phoenix Auto Equipment machines are capable of doing both for a fraction of the price. Just like all the major wheel service equipment manufacturers have realized the need to manufacture less expensive machines for those who provide the tire and wheel service, but it isn't their main market, we have also recognized that there is a range of needs for garages and auto body shops. Visit Phoenix Auto Equipment Here. Visit Cemb Wheel Service Equipment Here.

Nick, owner of RPM Cycles in Dover NH, stopped by the shop at the end of April to pick up a 72" 17 Drawer Rolling Tool Cabinet (#CDX722117RC). He says, "I like it, big draws hold alot of weight and they all close nice." This toolbox is available in black, green, orange, and blue, each with black trim. This box is a great buy - includes 6 mag wheel casters that hold over 900lbs each, 2 extra deep drawers to store larger tools, 2 extra wide drawers, a PVC-laminated MDF work surface, full-width powder-coated steel drawer pulls, and a high gloss powder coat finish. Rugged 14 gauge steel frame offers extra heavy-duty support.

He included some photos, these are awesome! And not just of the tool box...he previously purchased a PRO 1200 motorccle lift and a Phoenix Tire Changer. We appreciate all the photos and the feedback!

There are only a few states that have no statewide sales tax and New Hampshire is among them! However, some products and services do incur some taxes. For example there is a 9% tax on restaurants and prepared food consumed on-premises, a 9% tax on room and car rentals, a tax of $0.00055 cents per megawatt-hour on electricity, and a 7% tax on telecommunications services.

Harris in Warner, NH, for posts a great pic of his PRO 9000AC 2 post lift in action in his home garage!

Jeremy in Columbus, Ohio posted this nice pic of his Harley up on the PRO1200 lift and left us some comments...after owningi the lift for 2.5 years! We love these comments that come through from customers after time has passed so we can really get a sense of how the lift has held up. Jeremy says, "Review after a few years of almost daily use: everything is great! The scissor lift hasn’t even removed the paint/coating under the bike on the lift despite sliding in and out all the time. Definitely one of my favorite tools in the garage."

Eric in Rochester NH gave us some nice comments a few months ago about his tool box. He recently shared some great photos of his CRX7222519RC 72" roller tool box, and one of an open drawer with tools showing! He said of the box, "I purchased a RollCabs toolbox from them a few months ago (CRX722519RC). I have zero complaints with the box and love it. I’ve owned “name brand” boxes in the past and would definitely say the construction and quality is comparable. I love the fact that they have a ton of inventory so I didn’t have to wait and also could look one over before purchasing. You will not be disappointed in these boxes and I literally saved thousands compared to a tool truck! Highly recommend doing business with them."