Blog posts tagged with 'trike lift'

Randy of Cut N Shoot Customs Trike Shop in Conroe, Texas, posted this pic of his Honda up on his Elevator 1800 lift table to our Facebook business page and wrote, "We have one NH and Handys in our shop, soon to be just NH. These are great lifts." Pic is of a new Honda Goldwing DCT. Randy converts these bikes to trikes. He shared another pic of the same bike converted to a trike. He said this was one of two they did for a husband and wife - customers of his.

We want to thank Phil for posting some great pics of his newly painted 2012 Dyna Trike on the PRO 1200 lift table. He says it has a "Paughco axle and swing arm found a tub on ebay- the rest I fabricated." Phil reviewed the lift for us a couple months back. He said, "I really like it. Don't miss lying on a creeper trying to work on a bike less than 6" off the ground." That might be one of the most common comments we hear - it's a lot easier on your body with a lift table!

And here are a couple from the build:

Our PRO 2500 High Rise ATV/ UTV Lift , PRO 2500 Air/Hydraulic High Rise Snowmobile Lift and PRO 2500 High Rise Lawn Mower / Riding Mower Lift are so versatile in not only weight capacity but in width and lifting height, which means they can service a wide range of vehicles. We wanted to post a list of some of the possibilities:

Bobcat 3400, 3600 utility vehicles Kubota BX Series tractors, B Series Tractors, some L Series without attachments John Deere riding mowers, zero turn mowers, tractors, gator utility vehicles Toro Fairway, rough and trim surround, greens and specialty mowers, application equipment, cultivation equipment Smithco - all types of golf course maintenance equipment

Polaris Razor, Ranger, ATVs, Polaris Ace, Snowmobiles, gen electric carts Can - Am   Commander (all but 4 seater), maverick, outlander, renegade, ATVs Honda Pioneer 1000, Pioneer 700, Pioneer 500 ArcticCat Wildcat X, Wildcat Sport, Wildcat Trail, prowler, HDX700, HDX500, ATVs and Snowmobiles Yamaha - Wolverine, ATV, Viking ATV, 4x4 ATVs, Sport ATVs and Sleds Kawasaki Teryx UTVs all models, Mule UTVs all models, all brute force ATVs CF moto 2 force ATVs, C force ATVs, U force ATVs ARGo ATVs ATVs, including Can AM, Honda, Suzuki KTM, Yamaha, Kawasaki, Polaris, Arctic Cat

Golf Carts

Snowmobiles

Trikes

Spyders

Dirt Bikes

Lawnmowers

Tractors

Golf Course Maintenance Equipment including:

Aeration Equipment

Compact Utility Tractors

Fairway Mowers

Gator™ Turf Vehicles

Riding Greens Mowers

Rough, Trim & Surrounds Mowers

Sports Turf Walk Greens Mowers

Commercial Mowers

Golf Cart / Cars:

Berline

Club Car

Columbia ParCar

Garia Golf Cars

E-Z-GO Luxury Carts

Yamaha Golf Car

Grounds maintenance equipment, including:

Debris loaders

Pressure washers

Wheeled vacuums

Stump grinders

Log splitters

Skid steer chippers

Other equipment, including: Generator

Construction Equipment

Repair Asphalt Road Equipment

These lifts can be use for a variety of applications, including Government, Municipalities, Commercial/Industrial, Schools, Athletic fields and grounds.

Pick our PRO 2500 package that includes a vise and you can lift motorcycles including Aprilia, Benelli, Beta, Bimota, BMW, Buell, Brammo, Cagiva, Can-Am, CCW, Ducati, EBR, Harley-Davidson, Honda, Husaberg, Husqvarna, Hyosung, Indian, Kawasaki, KTM, Kymco, Laverda, Moto Guzzi, MV Agusta, Norton, Phantom, Piaggio, Polaris, Ridley, Roehr, Royal Enfield, Suzuki, Triumph, Ural, Vespa, Victory, Yamaha, Zero

This lift can pick up the top 10 massive cruisers, including: Yamaha V-Max Kawasaki VN2000 Harley-Davidson Street Bob Triumph Rocket III Honda VTX1800 (2001-current) Victory Hammer S (2007-current) Yamaha XV1900 (2006-current) Harley-Davidson VRSCD Night Rod (2006-current) Honda F6C Valkyrie Harley-Davidson Cross Bones

We wanted to provide some more detail about our new Elevator series lift tables. We are proud of their quality and versatility and thought a write up might help to further illustrate these points. These lifts are designed and crafted to last for years; they are not your average products. We guarantee that when you receive your lift you will be totally impressed with the quality, workmanship, and materials used in manufacturing. Spending many thousands of dollars on whatever you ride (motorcycle, ATV, UTV) is commonplace. Don’t trust an inferior product to lift your pride and joy off the ground! Elevator lift tables are made with thick 10 gauge steel, rugged enough to handle the heaviest vehicles.

We start with a quality frame and rectangular base, a footprint that ensures safety in lifting and safety in working. The base frame is fitted with a tow bar that accepts a wheel dolly. The base frame is also pre-drilled with to accept a wheel kit, allowing for easy placement and storage. A safety locking mechanism is built into the base with 4 and 5 settings, depending on the model, to adjust to your height. The scissor assembly is built rugged enough to keep the table top square to the base during lifting; it picks up and lowers the load smoothly without effort. You will never have to doubt the capacity of your lift. The lifting is guided by large bearings that roll along the tracks which are 2 to 3 times larger in diameter and width to the size of competitors. The lifting mechanism is very impressive to see in person and smooth to operate. The Elevator 1800 is equipped with two large air cylinders, side-by-side, again allowing smooth operation.

The Elevator 1100 is equipped with a single large air cylinder and both require very little air because of their efficiency. The table top is reinforced underneath with square tubing, welded and fitted for strength. The table top has unique features that make these lifts favorites. The 1800 lb has two drop down panels, one for rear tire service and one for front tire service, and both operate with quick squeeze linkage for release and lock. The 1100 lb model has one drop down in the rear only. The table top is also fabricated with square receiver holes spaced to accept the (4 pc.) side extensions. They slide in in seconds and can be removed just as fast. No piping, clasps or pins to install.

The wheel chock mounts into brackets on each side which allow the chock to slide in and out as needed, very quickly. This accomplishes two things: quick mount and dismount of the wheel chock. After you secure a motorcycle to the lift, just slide the wheel chock out of its mount, drop the panel, and remove the front wheel. Secondly, if the lift is a little short for your vehicle slide the wheel chock off the front of the table lift and add 9”-10” of length to your lift by extending the wheel chock. Equally spaced cutouts on the side edge of the table provide ratchet strap holes. If you choose to purchase side extensions, they mount with male square, each of the 4 piece side extensions has 2 male squares for mounting into the 2 female receivers in the lift table. You end up being able to configure the lift with any number of side panels you want to use. For example 2 in the front, or two in the back, or all 4. You can mount trikes, spyders, ATVs, UTVs, mowers, snowmobiles, golf course equipment etc. Two long ramps are included in the side extension kits.

We offer a fully adjustable wheel chock, 6 positions adjust for depth of wheel cup, narrow and a wide tire adapters, and a quick lock lever foot operated during loading. It is mounted in side rails for easy positioning or removal. We offer complete packages for both the 1100 lb capacity and 1800 lb capacity lift table. We also offer basic packages, you can order only the accessories you need. The quality is superior in whatever you choose, you will not be disappointed. If you don’t order the full packages, optional equipment for base lifts includes, side extension kits, wheel chock, dolly and wheel kit, scissor jack,110v electric upgrade. The Elevator 1800 lb lift table raises 40” max height and 8” lowered height. The high lift accommodates people of all heights. The Elevator 1100 lb. lift table raises 35” max height and 8” lowered height.

NEED A MOTORCYCLE LIFT TABLE? NEED A SNOWMOBILE LIFT TABLE? (1100lb and 1800lb capacity available) NEED A LAWNMOWER/LAWN TRACTOR LIFT TABLE? (1100lb and 1800lb capacity available) NEED A GOLF CART LIFT TABLE? (1100lb and 1800lb capacity available NEED AN ATV LIFT TABLE? (1100lb and 1800lb capacity available) NEED A UTV LIFT TABLE? (1800lb capacity only) For complete specifications, check out links above. Choose weight capacity and click on the link for your specific vehicle.

We are pleased to announce the brand new Elevator 1100 lb. Air Motorcycle ATV Lift Table to our shop in Bow, NH. The heavy duty Elevator 1100 bike lift includes 2 YEAR WARRANTY, 30" loading ramp, easy-on/easy-off slide in receivers for optional side extensions, Air operated single cylinder for smooth operation, a 2 step air-operated foot pedal, heavy duty track and bearings for smooth operation, a receiver for optional wheel dolly, a pre-drilled base frame for optional wheel kit and height safety lock system, adjusts to many positions.

Lift includes optional additional 2 year warranty It also includes a rear wheel drop down panel making service on your bike or ATV nice and easy. This lift comes with a 2 year warranty and is built beautifully. There is no better lift built anywhere. We are confident that both the design and craftsmanship will blow you away! The optional accessories available allow the lift to handle motorcycles, as well as trikes, spyders, ATVs and some UTVs, mowers, and golf course equipment etc.

ELEVATOR 1100 MOTORCYCLE LIFT TABLE SPECIFICATIONS

Table Capacity: 1100 lbs. Air Requirement: 90-120 PSI Table Size: 84" X 24" Working Height: 35" Table Thickness: 10 Gauge Table Weight: bare weight with no accessories 376 lbs Loading Ramp: 30", Quick lock and dismount drop down panel for rear wheel service, easy up and down safety air pedal 4 safety locking positions Square Quick Mounts: No hassle to mount side extensions Cutouts for Ratchet Straps Heavy Duty Roller Bearings and Tracks Wheel Dolly and Wheel Kit Ready

Check out the product page on our website here: Elevator 1100 Motorcycle ATV Lift Table Call Clark at 603-234-2612 or visit us at 1298 Rte 3A in Bow, NH.

Thanks to Lee at 21st Century Equipment, Inc. in Sidney Nebraska for his comments about his new PRO 2500 Motorcycle ATV UTV High Rise Lift Table! "We got the unit assembled and are using it. The tech that is using it said he is happy with the performance of the lift. No complaints.  Thanks."

-Lee, 21st Century Equipment, Inc. Sidney, NE

PRO 2500 ATV UTV Golf Course Equipment Lift features 48" Rise and Quartered Side Extension Panels for a variety of vehicles. Electric/Hydraulic Power Unit.

Specifications:

VISIT: https://www.nhproequip.com/pro-2500u-48-high-rise-air-atv-utv-lift

Thanks to Greg of Fort Plain NY for the great review of the PRO 2500 High Rise UTV Motorcycle Lift! We're so glad to hear you are happy with the lift - and the service. That's just as important, in our opinion! "Just finished un-crateing and putting together my new lift to replace my old 1000# unit that wouldn't do the job anymore and all I can say is WOW !!-- From the great personalized service from Clark to the super fast tailgate delivery to the lift itself, everything is PERFECT !--The crate job was the best I have ever seen and the lift takes no time to assemble with one other guy. This lift picks my Kubota RTV 900 and my BX2360 w/loader and is far and away the best on the market. It is very heavy duty and I just can't say enough GOOD about my experience with NHProEquipment."