We received an inquiry today from a local customer about a Quality Lift that I thought was worthy of translating into a blog post. This is a common question about the car lifts we sell and thought it might be good to share the answer with the world. Please note the certifications - if you own an auto repair shop, certifications are absolute necessities. Hi Clark Been doing a little checking around on the lifts. This one has more capacity than yours and is $500 less. Is this a good lift? What is the difference compared to yours? Here was our response: 1. The electric pump assembly and reservoir are of much lesser quality. It is not uncommon for these to need replacement in 3 years or less. Our lift uses an SPX pump, which is the standard in U.S. 2. The above symbol and certification is very important for liability (accidents), insurance, and for OSHA approval. If your shop is ever visited by OSHA a lift without these certifications does not meet their standards. The Quality Q10 2 post lift meets every certification *ANSI, *ALI, *ETL. The other lift meets none. 3. Versatility of the 3 stage front arms allow correct weight distribution and balancing for mounting vehicles within weight range. 4. The Quality Q10 uses nylon bearing surfaces behind each carriage unit that allows years of operation without binding during up and down travel of carriage within column. 5. Q10 has single point lock release meaning you can operate up and down from 1 station right at the power supply. With the 2 point lock release you have to walk to both sides and manually release the safety locks. This can be a pain, especially when you are busy. 6. Base plate design. The Q10 has welded gussets and a solid base plate, not an add-on piece for stability. 7. Service, if needed I am right down the street. *ANSI (American National Standards Institute): As the voice of the U.S. standards and conformity assessment system, the American National Standards Institute (ANSI) empowers its members and constituents to strengthen the U.S. marketplace position in the global economy while helping to assure the safety and health of consumers and the protection of the environment. * ALI (Automotive Lift Institute, Inc): In 1992, ALI selected Intertek Testing Services, then known as ETL Testing Laboratories, as its strategic partner in developing and administering the first independently verified product certification program for the automotive lift industry. The resulting program launched in 1993 and the first "ALI Directory of Certified Lifts" was published in October of the same year. In addition to administering and validating the ALI Certification Program, Intertek is one of two independent laboratories recognized by ALI and nationally accredited to perform evaluations in accordance with ANSI/UL 201. This approach to product certification allows for “one-stop shopping” for lift manufacturers, and more specifically, Intertek offers ALI’s Certification Program participants:
- Electrical safety listing services for all regions within North America (Nationally Recognized Electrical Listing Mark);
- Testing and preparation for CE Marking (European Technical File Services); and
- Consolidated testing and follow-up inspections. This streamlines the process of getting the product to market.
- Administration and testing evaluations supporting the ALI program are coordinated from the 160,000 square-foot Intertek facility in Cortland, New York. ALI/ETL witness testing is performed by the Certification Program Administrator’s staff at the manufacturer’s facility regardless of country of origin.
* ETL (Originally a mark of ETL Testing Laboratories, now a mark of Intertek Testing Services) is a global leader in testing inspection and certification services. They are a Nationally Recognized Testing Laboratory and tests products to UL, CSA and CE standards.
